New Dirt Late Model Parts - "Showroom" 
 


MD3 Dirt Late Model NOSE KIT with Graphics.

KIT Includes: MD3 Left and Right Nose, Left and Right Ear/ Fender, and Headlight Graphics Kit. 
COLORS available: Black, White, Red, Blue, Yellow, and Orange.
PRICE:  $234.50

(Lower Valance is $65.00 extra)

----------------------------------------------------------------

SPRING STEEL & SHRINK SLEEVE KIT

Includes: 40 ft. Roll of Spring Steel, 1" wide, and 25ft roll of Shrink Sleeve to put over the spring steel. 
Sold as a KIT.

KIT PRICE   $87.90

----------------------------------------------------------------


Here is the NEW Fuel Safe 28 gallon Racing Fuel Cell for Dirt Late Models - full bladder tank, lightweight, complete, with rollover valve - we have installed these and they are very nice!
from $895.00

-------------------------------------------------


Bloomquist TEAM ZERO
1" Wide 5 Wheel Spacer
Billet Aluminum, w/ studs
$160.00


FACTORY ROCKET
 Front Spindle for Blue or Black Front End Rockets
$185.00

-------------------------------------------------


FALCON Roller Slide Transmission
optional black coating, Bert front snout
$1,850.00 silver


SWEET Mfg. Power Steering UNIT
complete w/ servo, New Style ends for Blue Front Rocket car. With longer Hoses
(not pictured).
$1,095.00

----------------------------------------------


Here is the new  MD3 Lower plastic body trim installed, when you see it up close it is super nice and simple to install!  

$38.95 per Plastic Piece 
Need 3 per car


16Volt TURBO START Battery
$232.90

----------------

     
2014 ROCKET CHASSIS KIT.... $5,395.00

PANCHO's can handle the Assembly of your New Rocket Chassis Car - new or used we can improve your racing program by a Professional Car Assembly the will save you costly DNF's.  Come check out our beautifully prepared cars & our customer cars.

-------------------------------------------------

 Winters REAR END

Winters Rear End w/ 8" R&P, 4.12 ratio, gundrilled lower shaft, REM Ring & Pinion, new 6 bolt O-ring billet aluminum rear cover, Black Thermal Coated, Black Axle tubes 
8" R&P in the 10 case - Super light rotating assembly.
From.... $1,595.00

-------------------------------------------------

-------------------------------------------------------


PANCHO's Does BODIES!
Our Professional staff will fabricate & install your Late Model Body on any brand car.  From Complete package (like this red car) to just a Fender!  We stock body pieces in white & black.  
CALL for a Quote.

-------------------------------------------------------------------------------------------------------------------
Below are some new Photos of the Dirt Late Model Show Room.  Please stop by in Hanover PA and see for yourself - a complete inventory of DLM parts, we Specialize in "Rocket Chassis" Brand!


----------------------------------------------------------------------------------------------------------


WELD WHEELS    Wide 5 
Non Beadlock Wheel..................................$138.91
Outside Beadlock Wheel w/ mud cover.......$279.99
Non Beadlock, With Mud Cover....................$229.50
Left Rear INSIDE BEADLOCK Wheel.............$365.00

---------------------------------------------------------------------------------------------------

We stock Bumpers, Deck Bars, Door Bars, Spiders Front T supports, "POP" Brand Rivets, Rocket and Keyser New style rear spoilers in mill and Black finish, 3 styles of plastic lower nose supports, MD3 Nose Kits, Roofs, SHEET Aluminum, and so much more - you have to stop by to see it.


Race Coveralls - CAR COVER for your Dirt Late Late Model
Call for Pricing......717-646-0090




The NEW for 2011 MD3 Fenders are Here!  We have got them in stock!
Fender Only....$68.00


MD3 2014 Nose & Fender KIT with the NEW style Fenders WITH DECALS!

PRICE......$234.50 - lowest you will find!

Yes Sir, the Kid Rocket Car was sporting this 'Flare Kit' at the PRI Trade show and was all the talk.  We have these on the way, CALL for Pricing.


Lower Valance KIT (4 pc. kit) that fit the MD3 noses, they come all the colors as well, white, black, blue, white, red, and yellow.
4pc KIT,  PRICE.....$65.99

9 piece alum body brace kit for Dirt Late Model
$85.00 kit
We used this kit on our house car and it made fitting panels very easy!

 

1" wide by 40 feet roll of SPRING STEEL for Body panels
$74.90 per roll
To Cut spring steel you need to use a chop saw and it cuts it with no problem.  We also have a "Spring Steel PUNCH" that uses a hammer to put a hole in the end for the bolts to go thru.


BUMP STEER Kit
Here it is, simple yet what you need to adjust the bump steer in your Late Model steering.  Comes with  a Grade 8 5/8" bolt and all the shims to adjust the bumpsteer!
PRICE.....$5.99


BLACK SHRINK TUBING
Shrink sleeve is for when you double up your spring steel going to the body.  Comes in a 25ft roll, just slide it on and heat it up and presto, no rusty spring steel or spring steel that flexes apart!
PRICE.....$24.95  for 25 ft roll


We STOCK ROCKET Factory Parts!


4x10' 6"    SHEETS of ALUMINUM
extra long for Late Model Bodies!
Every DAY PRICED at  
 $69.99 In Stock Only

.040 gauge, 4ft x 10ft



ROCKET 1 Pc. LOWER
Blue Front or Black Front for screw in ball joint
$145.00



Brake Pressure Gauges Kit - check pressure front to rear
KIT $76.50

HTD BELTS - by Peterson & KSE
various sizes 20mm & 30mm
$44.00 each


ROCKET LOWER CONTROL ARM
2 piece style, screw in Ball joint.
$75.00

MSD Ignition BOX - MSD6AL
$220.00


ROLLS of PLASTIC
10 feet roll - $20.90
25 feet roll - $48.90

Also available in 4x8 sheets
Sheet Plastic  $42.00

RF Electric Brake SHUT OFF Kit
$74.90


FRONT BUMPER - "Rocket".............$129.99
DOOR BARS - Rocket...........................$26.50
"Spiders" for Door Bars - ROCKET.........$52.95 ea.

REAR DECK BARS - "Rocket"..............$39.99
FRONT Tee Bars - "Rocket" ................$44.00





FRONT BUMPERS
ROCKET
$129.99


TWM Billet Bearing Birdcages
$915.00 per set

Five Star front nose Graphics Kit
Headlights, grill, emblems, etc...
CHARGER< CADDY< IMPALA< FUSION

$30.00 kit
 


Holley Fuel Log Kit
$58.90

TIRE PREP STAND
spins wheel/ tire for grinding, siping, or measuring - and it folds up - perfect for Late Model wheels!
$175.00


ALUMINUM MOTOR MOUNTS
Chevy small block alum motor mounts
$15.90 ea


REAR BRAKE BRACKET
mounts the caliper to the birdcage on the rear of the car - real strong piece!
$31.95


GAS PEDAL
- Adjustable
fully adjustable gas pedal, precision bearing, comes in angle mount or straight mount.
$122.00


RADIATOR Top MOUNT KIT
utilizes springs off the front of the top mount to keep your radiator in place - a real clean installation.
$53.00


 
DECK MOUNT REAR END TANK
Fill and / or Vent
Real nice tank, mounts flush to the deck, AN fitting on the bottom to fill the rear end back up after a gear change.

$43.00


EXPLODING RIVETS

3/16" large head silver exploding Rivets

$38.50 per box

   

HELMET Blower System
$169.99

Clevis Kit for BERT Transmission
Make shifting gears EASY with this new clevis kit - it eliminates hard shifts.
$17.00

REAR ROOF Slotted Brace

$9.99 

Slotted Body Strap 46" long, Aluminum
$9.99 

DIRT LATE MODEL

Lexan WINDSHIELD

$38.99

DOOR SPIDERS
for ROCKET cars, Right side door Spiders, front or rear one, come ready to bolt on!
$52.95 each

Bolt In Ball Joint - Quality ALLSTAR
Joint, not some cheap one that will break first time out!
Bolt In Ball Joint.........$18.90

KEYSER Upper A-ARM
We stock these for most cars, bolt in or screw in style and split style also.
Screw In 8.25" & 11.25" and also LF Split with Bolt in styule ball joint - ALL from KEYSER.

UPPER A-ARM all styles..........$65.00

AFCO COIL SPRINGS
10", 12", & even 14" All Spring Rates
AFCO COIL SPRING............$65.00ea.

AFCO Shock Thread Protector
These are great!  are your threads messed up due to the soil rubbing the shock ?  This will solve the problem, screw these plastic covers over the bottom 3" of the shock to protect those expensive shocks.
4 Pack of Protectors......$75.00

AFCO TAKE UP Spring
5 lb take up spring from AFCO
$47.90

AFCO NYLON SLIDER  (for take up spring)- goes between your normal spring & the take up spring & slides with movement....$19.90 (not pictured)

SCS GEARS
Light Weight SCS.............$165.00
Std Winters GEAR SET........$73.50

BATTERY DISCONNECT SWITCH

$20.90

BATTERY CABLE KIT
2 Gauge - 15ft of Red positive cable, 2 ft. of negative black cable, 4 crimp power rings, 2 battery terminals.
Battery Cable Kit.........65.90

BOLT IN BATTERY BOX

$38.00

WELD IN BATTERY BOX

$25.90

STEEL MOTOR MOUNTS
Crate or Std Chevy 
$12.90 ea.

STARTER SOLENOID

$11.90

SWEET POWER STEERING FLUID

Quart...........$19.95

BERT "Black Magic" Transmission Fluid
Quart........$19.99

ALUMINUM 4 Link RODS  
12" to 13.5" .............$12.95
14" to 15.5".............$12.95
16" to 20"................$13.95

SWEET Steering Universal
Sweet spline to 3/4 Smooth 
$55.00

CANTON DRY SUMP PAN

Chevy S/B.............$215.00

90 deg bend Exhaust
Schoenfeld .............$22.90ea

HOWE MASTER CYLINDER
NEW - - NEW - check out this new master cylinder from Howe - basically made for the Dirt Late Models.
$74.90

U-JOINT
$12.90

Hyd. CLUTCH LINE KIT
$27.90

Oil Press. GAUGE LITE KIT

$29.90

12" PIT SOCKET

for 1/2" Impact guns, long extension

$43.90

LUG WRENCH - Spinner style
$39.00

VICTOR Jr.  Port Matched Edition

Eldebrock Intake Manifold, Victor Jr. Port Matched edition
$260.50

Hi Flow WATER PUMP
Heavy Duty 3/4" shaft
$68.90

Weight BAR CLAMPS

1.25", 1.375", 1.50", 1.75"
$12.90ea.

6 BLADE Steel FAN

$34.90
 

WILWOOD Brake BIAS Adjuster

$59.90

"JOE's Racing" Aluminum Steering Wheel
This steering wheel is 15" diameter, lightweight, and strong.
$68.90

WILWOOD Wide 5 HUB
Aluminum Hub w/ studs......$89.90

Bearings for Hub........$9.00
 Blue Hub Seal.............$9.00 

WILWOOD DRIVE FLANGE
Splined for rear axle.....$55.90
Dust Cover for front Hub.....$12.90
(bolt on style)

WILWOOD 1.25" ROTOR
Standard Steel...........$34.90

WILWOOD 1.25" SCALLOPED
Lightweight Scalloped brake rotor 1.25" width
$89.90

4' x 10' ALUMINUM SHEETS - .040

Black, White, Red, Blue

$69.99ea.

ALLSTAR RADIATOR
  28x19 or 29x19
Aluminum radiators - various sizes avail.

PRICED at $159.95

ULTRA-Shield Total Support  20deg
LATE MODEL SEAT 
Black Full Cover, 20 deg, from 14", 15", 16", 17", 18"   $595.00

QUICK STANDS
 very light weight, but holds uo to 3000 pounds - sold by the SET These are made of Aluminum!
PRICE - $ 110.00 per pair
--------------------------------------------------
 
Late Model Fiberglass ROOF
lightweight and very strong, Black, White, Red, Blue.
$194.90 

MD3 NOSE & FENDER KIT Includes:
2 piece nose, 2 fenders, and Decal KIT  - All from FIVE STAR BODIES. many colors.
 
  PRICE   $234.50
 
WELD LATE MODEL WHEELS
14x5off - NBL   $154.99.00
14x5off - Beadlock  $295.00
 

KSE Racing Products - TANDEM PUMP
 FUEL & Power Steering
We have been a Dealer for KSE Racing Products for a few years, however we started using one of these pumps on our Dirt Late model last year and it has been nothing but PERFECT!
This "Tandem" KSE power steering pump & fuel pump is worry free, it will put the fuel to your expensive late model motor without worrying if it will fail.  The above style is to be bolted on the back of your dry sump oil pump off the back of the motor, the power steering pump is the black & silver part.  The P/S pump has just 2 ports, 1 is for pressure, and the other a return line - simple.  The fuel pump, the gold & black part, has 3 ports - 1 for the inlet side from the fuel tank, then 1 on the other side for the fuel to flow to the carb, the 3rd port on the top is your return line that goes back to the tank - simple.

This pump is the ultimate for the serious racer - from a touring pro to the Saturday night Limited motor racer - well worth the money!  Call us for the details on this pump!
 Priced at $ 765.00